Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:drucken:drucken [2024/10/25 18:26] – [Fiber length distribution] neelest
+++ en:drucken:drucken [2026/09/17 16:04] (aktuell) – gelöscht - Externe Bearbeitung (Unbekanntes Datum) 127.0.0.1
@@ Zeile 1: / Zeile 1: @@
-======Printing======
-===== Printing =====
-Printing can be done via the **Toolbar**,
-{{ :drucken:rex_171_drucken_001_en.png?nolink |}}
-//Project//→//Print// or via //Ctrl + P//. A menu opens with the **Print settings**.\\
-PDF files can also be created using a ‘pdf printer’.
-====Page settings====
-The paper, portrait or landscape format and distances to the edges can be selected here
-{{ :drucken:rex_171_drucken_002_en.png?nolink |}}
-  * //Preview//: opens a print preview
-  * //Print//: Starts printing
-  * //OK//: Closes the menu, changed settings are saved
-  * //Cancel//: Closes the menu, changed settings are not saved
-  * //Help//: opens these instructions
-==== Settings ====
-The header, footer and cover page can be configured in the top tab (here "Dzs.ppro").
-All subsequent tabs correspond to a new sheet in the printing process and can be customized or deactivated for printing.
-{{ :drucken:rex_171_drucken_003_en.png?nolink |}}
-==== General ====
-General information on the process and a short report on the results can be printed out here.
-{{ :drucken:rex_171_drucken_004_en.png?nolink |}}
-==== Diagram ====
-All diagrams that can be displayed during the process can be selected and configured here.
-{{ :drucken:rex_171_drucken_005_en.png?nolink |}}
-==== Special diagrams ====
-Diagrams that are not curves can be selected here. In PSI, comparison diagrams for front/rear screw position can also be selected here.
-{{ :drucken:rex_171_drucken_006_en.png?nolink |}}
-==== Results ====
-Lists of results for the diagrams and user-configured result lists can be selected and printed here.
-{{ :drucken:rex_171_drucken_007_en.png?nolink |}}
-==== Material ====
-Information of the material can be selected here.
-{{ :drucken:rex_171_drucken_008_en.png?nolink |}}
-==== Machine ====
-Here you can select partial areas of the machine, a full-page overall view and details of individual screw zones.
-{{ :drucken:rex_171_drucken_009_en.png?nolink |}}
-==== Data sheet ====
-Data sheets can be selected for printing here.
-{{ :drucken:rex_171_drucken_010_en.png?nolink |}}
-==== Variation ====
-Variations for printing can be selected here.
-{{ :drucken:rex_171_drucken_011_en.png?nolink |}}
-==== Printing diagrams ====
-Another way to print diagrams is to right-click on the diagram and select Print from the menu that appears. Only the diagram will be printed.
-==== Multigraphic ====
-Here you can print currently displayed diagrams and result lists from the multigraph.
-{{ :drucken:rex_171_drucken_012_en.png?nolink |}}
-==== Fiber length distribution ====
-The sub-areas of the fiber length distribution can be selected for printing here. How length distribution works: Up to 4 diagrams are printed per page. The entries "from" and "to" are the positions of the first and last diagram, the others are equally spaced in between.
-{{ :drucken:rex_171_drucken_013_en.png?nolink |}}