≪ View Page

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Nächste Überarbeitung		Vorhergehende Überarbeitung
en:eingabe_der_maschinenparameter_und_konfiguration:regelwerk [2025/05/12 20:06] – angelegt deppe2en:eingabe_der_maschinenparameter_und_konfiguration:regelwerk [2025/12/22 15:08] (aktuell) – neelest
Zeile 1: Zeile 1:
 ====== Screw Design Rules ====== ====== Screw Design Rules ======
  
 +Under the menu item //Manage rules//, rules for checking the process design can be managed.
 +
 +The SIGMA user can add new rules to the existing set of rules. To do this, press the '+' button above the list on the left-hand side of the window. Then a name can be defined for the rule and a rule construct can be selected to make it more specific.
 +
 +{{ :en:eingabe_der_maschinenparameter_und_konfiguration:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_006.png?nolink |}}
 + 
 +In the left-hand list, the user also has the option of activating or deactivating existing rules with a tick. The buttons //Import...// and //Export// allow the rules to be shared with other SIGMA users. Afterwards, the user can check his process design with the active rules.
 +
 + 
 +==== Check Screw Design ====
 + 
 +
 +Subsequently, it can be checked whether a machine configuration corresponds to the stored rules. To check the machine configuration of a process, the process must be selected. The check is performed via the button //Check screw design//. The button can be found in the menu ribbon under //Simulation//. All rules that are marked with a green tick in the //Screw Design Rules…// window are taken into account.
 + 
 +{{ :en:eingabe_der_maschinenparameter_und_konfiguration:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_006_02.png?nolink |}}
 +
 +Afterwards the //Check screw design…// window opens up. The window shows whether the machine configuration of the process meets the individual rules. The font colour of the fulfilled rules is black. If a rule is not fulfilled, its font colour is red.
 + 
 +{{ :en:eingabe_der_maschinenparameter_und_konfiguration:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_006_03.png?nolink |}}