≪ View Page

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Nächste Überarbeitung		Vorhergehende Überarbeitung
en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:uebergangsknetelemente [2025/05/12 20:04] – angelegt deppe2en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:uebergangsknetelemente [2025/08/17 01:30] (aktuell) – deppe2
Zeile 1: Zeile 1:
 ====== Transition Elements ====== ====== Transition Elements ======
  
 +
 +===== Transition Elements =====
 +
 +While defining **Transition kneading elements** a few aspects are to be considered:
 +  * In order to define kneading blocks completely, the **Number of discs** of one kneading block is to determine in addition to **Length** and **Diameter**.
 +  * Furthermore, the **Staggering angle** has to be entered for the discs. The staggering angle is only permitted in the range of
 +
 +$$-\frac{180°}{i} \leq \text{Versatzwinkel} \leq \frac{180°}{i}$$
 +
 +with i as **Number of flights** of the element. 2-3 describes a transition element with double-flighted to triple-flighted construction, and 3-2 vice versa. A negative angle identifies a reconveying kneading block, in contrast positive angle characterizes a conveying kneading block. Neutral kneading blocks are indicated by a Staggering angle of $$\frac{180°}{i}$$. The transition angle $$\alpha'$$ describes the staggering of the last disc.
 +
 +{{ :en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_schneckenelemente_023.png?nolink |}}
 +**Figure:** Input mask transition kneading block