≪ View Page

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente [2026/04/07 14:18] – [Pushing Flight Elements] pkaen:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente [2026/04/07 14:22] (aktuell) – [Kneading Elements] pka
Zeile 47: Zeile 47:
 ===== Threaded Mixing Elements (Conveying and Reconveying) ===== ===== Threaded Mixing Elements (Conveying and Reconveying) =====
  
-Unlike conveyor elements, screw mixing elements have grooves cut into their flanks. In addition to the pitch and number of grooves, the geometry of the groove in the normal section must also be defined. To ensure maximum flexibility, the geometry of the groove has been simplified by using a rectangular cross-section (characterised by groove width b and groove depth h).+Unlike conveyor elements, screw mixing elements have grooves cut into their flanks. In addition to the pitch and number of grooves, the geometry of the groove in the normal section must also be defined. To ensure maximum flexibility, the geometry of the groove has been simplified by using a rectangular cross-section (characterised by groove width b and groove depth h). Further details about the geometry of threaded mixing elements can be found in the reference manual (s. [[en:grundlagenhandbuch:geometriegroessen_des_gleichdrall-doppelschneckenextruders#screw_mixing_elements | Threaded Mixing Elements]]).
  
 {{ :en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_schneckenelemente_011.png?nolink |}} {{ :en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_schneckenelemente_011.png?nolink |}}
Zeile 73: Zeile 73:
 {{ :en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_schneckenelemente_005.png?nolink |}} {{ :en:eingabe_der_maschinenparameter_und_konfiguration:schneckenelemente:en_sigma150_dlg_eingabe_der_maschinenparameter_und_konfiguration_schneckenelemente_005.png?nolink |}}
  
-Unlike conventional kneading blocks, **shoulder kneading block** have narrower kneading discs, which creates a larger leakage gap. In SIGMA, the width of the kneading discs of the shoulder kneading elements is assumed to be half the width of the conventional kneading blocks. It follows that the input masks for the two elements do not differ.+Unlike conventional kneading blocks, **shoulder kneading block** have narrower kneading discs, which creates a larger leakage gap. In SIGMA, the width of the kneading discs of the shoulder kneading elements is assumed to be half the width of the conventional kneading blocks. It follows that the input masks for the two elements do not differ. Further details about the geometry of shouldered kneading blocks can be found in the reference manual (s. [[en:grundlagenhandbuch:geometriegroessen_des_gleichdrall-doppelschneckenextruders#shouldered_kneading_blocks | Shouldered Kneading Blocks]]).
  
 ===== Eccentric Kneading Elements ===== ===== Eccentric Kneading Elements =====