Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:eingabe_der_schneckendaten:eingabe_innentemperierter_schnecken [2024/10/16 16:06] – [Define internally tempered screws] neelest
+++ en:eingabe_der_schneckendaten:eingabe_innentemperierter_schnecken [2026/09/17 11:36] (aktuell) – gelöscht - Externe Bearbeitung (Unbekanntes Datum) 127.0.0.1
@@ Zeile 1: / Zeile 1: @@
-======Define internally tempered screws======
-===== Internally tempered screws =====
-It is possible to calculate "externally" internally tempered screws in REX. "External" means that an external temperature control unit flushes a cooling medium with a defined input temperature and flow rate through the screw core in order to temper it. This usually involves cooling, but heating can also be calculated.
-{{ :eingabe_der_schneckendaten:abb_innentemperierung_01_de_en.svg?nolink&600 |}}
-The internal temperature control is defined via the dialogue for entering the screw and the "Internal temperature control" button.
-{{ :eingabe_der_schneckendaten:rex171_innentemp_en_001.png?nolink |}}
-In the window that opens, you can set in the drop-down list at the top whether the auger has no internal temperature control or has external internal temperature control.
-{{ :eingabe_der_schneckendaten:rex171_innentemp_en_003.png?nolink |}}
-The bore and the inner pipe as well as the thermal conductivity of the screw and the inner pipe must be specified under the "Screw" tab. For steel, 45 W/(m*K) is assumed here as standard.
-The temperature control medium must be defined in the "Cooling medium" tab. You can choose between "Water", "Oil" (Regloplas RO 150) and a user-defined medium. In addition to the medium itself, the inlet temperature and the flow rate must also be specified at the bottom of the window.
-{{ :eingabe_der_schneckendaten:rex171_innentemp_en_002.png?nolink |}}