Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:grundlagenhandbuch:einleitung [2025/05/13 15:44] – angelegt deppe2
+++ en:grundlagenhandbuch:einleitung [2026/01/26 10:47] (aktuell) – deppe2
@@ Zeile 1: / Zeile 1: @@
 ====== Introduction ======
-  *[[en:Grundlagenhandbuch:Einleitung:Einleitung2]]
+The joint project "Computer Aided Simulation of tightly inter-meshing, co-rotating twin screw extruders" started in 1992 is drawing to close. Today, SIGMA allows the user to evaluate processes of co-rotating twin screw extruders before they are performed in the lab. Hence, the use of SIGMA results in saving both money and time and with that in shorter development and optimization times. Among other things the current version SIGMA 5.4 supports the user in performing a scale-up from lab-scale to production-scale.
+The reference manual at hand tends to impart theoretical basics that are the basis for SIGMA. However, this manual is only in the position to impart basics; a comprehensive list of references is given for more detailed information. The manual at hand should impart the knowledge, which is required for both the correct use of the software and the critical evaluation of processes. More detailed information regarding to the programming are not included in the reference manual, due to that the programming details are described in the user manual.
+We appreciate the support of all our project partners! Without their support SIGMA could not exist.
+The Software-Engineering Team SIGMA
+Paderborn, January 2011