Path: Main menu: Simulation > Calculation settings..



The item Simulation, Calculation settings in the menu contains all options for managing calculation settings. When choosing this item, the window shown in the figure opens up.

Calculations are chosen by marking the belonging check boxes. Some of the options are related to another one. Due to that some check boxes are marked by setting another option. Moreover the pressure profile is marked automatically, because of that it is the basis for all further calculations.

The calculations are done iteratively. The user can choose either to determine a number of iterations for SIGMA to accomplish or to give a deviation [%] and a maximum number of iterations. When the results of the current calculation section differ less from the previous section than given the calculation will be finished. If the deviation is not achieved after accomplishing the maximum number of iterations the calculation will be finished, too.

It is not possible to perform a calculation as long as the machine data, configuration data, material data and process parameters are not defined completely. In case of incompleteness or in case that these data are not reasonable the matching settings can not be marked.

A calculation is started by clicking on the button Calculate. After that the results can be viewed in a diagram or as result list. Both options are placed in the menu at the item Diagrams. There are placed all diagrams, for instance temperature profile and melting profile. The other way to activate one of the diagrams is to activate it with help of the belonging icons.

The result lists are placed in the menu at

Path: Main menu: Simulation > View results.



Additionally, there are placed the commands for saving and exporting these lists.

Path: Main menu: Simulation > Save results as…



Path: Main menu: Simulation > Export results..

The following calculations can be chosen in SIGMA:

• Pressure profile (s. linearer_druckansatz_und_polynomansatz
• Filling degree
• Melting profile (s. Melting Calculation)
• Power profile (s. Torque and Power Consumption)
• Temperature profile (s. Melt Temperature)
• Consider an optional heat flow
• Residence time distribution (s. Residence Time Distribution)
• Degree of dispersion (s. Degree of Dispersion)

All settings for the calculation are defined in the dialog Calculation Settings.

• Pressure profile: Within this calculation it can be chosen between the polynomial, the linear and a regression calculation model. The linear one bases on an analytical approach based on the theory of single screw extruders. Against this the polynomial calculation and the regression model base on an approximation of numerical results. By selecting the modified option the treatment of the nip region in the calculation can be chosen. From our experience the regression model that was newly implemented in SIGMA 4.5 gives the most reliable results.
• Melting profile: Within this calculation it can be chosen between four different models: Compacted, Disperse, Binary and Modified Disperse. The compacted calculation model is a modified Tadmor model as it is known in the theory of single screws. The disperse model presumes that the granulate melts isolated. The binary model takes the melting of binary systems (blends and compounds) into account. The modified dispersed melting model is based on the dispersed model. However, the finite influence duct dimension, the influence of the convection as well as the influence of the particles on the stream will be included additionally within this model.
• Temperature profile: Within this calculation it can be chosen between a traditional rectangular model and a new twin screw model. If a heat flow is considered for the temperature calculation, SIGMA adapts the barrel temperature.
• Power profile: Within this calculation it can be chosen between a traditional rectangular model and a new twin screw model.
• Degree of dispersion: For the calculation of the degree of dispersion it can be chosen between a model for the degree of dispersion and an energy model.